| Test Name |
Description |
Status |
Notes |
| AIC3106 | Audio tone and loopback through McASP1 | PASS | Pins 1 and 2 (SCL/SDA) are swapped on AIC3106 part body |
| DIP Switch | Displays DIP switch value on LEDs | PASS | . |
| EEPROM | Reads/writes to the I2C EEPROM | PASS | . |
| EMAC Loopback | External Ethernet loopback (RMII to PHY) | PASS |
- Can perform external loopback (RMII data + PHY ok)
- Blue wire CRS_DV to pin 81 (SMRXDV) instead of pin 87 (SCRS)
- MDIO_CLK, MDIO_D swapped on U8
- EMAC_RX0CP holds 0xFFFFFFFC instead of receive descriptor
- Requires external Gigabit Loopback Plug. Click here for a picture of it.
|
| LED | Displays a pattern on the LEDs | PASS | . |
| SD | Reads/writes to SD card | PASS | - SD_DATA2 and SD_DATA3 swapped on U31
- Secure digital X1 and X4 data tested(/li>
|
| SDRAM | Fill and pattern tests on SDRAM | PASS | . |
| RTC | Sets the clock time and reads it back after a delay | PASS | . |
| Set MAC | Sets MAC address in I2C EEPROM | PASS | - Enter the last three numbers only, each separated by a hyphen.
|
| SPI Flash | Reads/writes to SPI Flash | PASS | . |
| UART | External UART loopback | PASS | - Requires external loopback connector
|
| USB Power | Toggles USB host power supply | PASS | . |
| Embedded USB Emulator | Embedded USB Emulator test | PASS | . |
