| Documentation |
Link |
Quickstart Guide
Description XDS560v2 STM Emulator setup.
| PDF - 08/06/2010 |
Quickstart Guide
Description XDS560v2 STM Traveler Emulator setup.
| PDF - 06/08/2011 |
Quickstart Guide
Description XDS560v2 LC Traveler Emulator setup.
| PDF - 01/26/2012 |
Technical Reference
XDS560v2 STM emulator hardware setup and mechanical details.
| PDF - 07/29/2010 |
Technical Reference
XDS560v2 STM Traveler emulator hardware setup and mechanical details.
| PDF - 06/08/2011 |
Technical Reference
XDS560v2 LC Traveler emulator hardware setup and mechanical details.
| PDF - 01/26/2012 |
Sd560v2Config
XDS560v2 Configuration Utility Guide.
| PDF - 06/22/2010 |
Firmware 2.2.0.5
XDS560v2 and XDS560v2 Traveler Firmware update.
| ZIP
README - 09/30/2011 |
TechNote_10
Describes how to setup an XDS560v2 USB connection for remote access.
| PDF - 06/22/2010 |
TechNote_11
Linux specific driver setup and validation.
| PDF - 12/15/2010 |
TechNote_12
Describes how to setup an XDS560v2 ENET connection with off the shelf WiFi adapter.
The WiFi connection provides physical isolation between the user and the target system. This type of isolation
may be applicable to motor control, automotive, remote system monitoring to name a few.
| PDF - 03/02/2011 |
TechNote_13
Describes how to setup multiple XDS560v2 USB connections.
| PDF - 05/20/2011 |
TechNote_14
Documentation and support files to operate the XDS560v2 Traveler as a RNDIS/Ethernet gadget.
| ZIP - 08/17/2011 |
Cable Adapters
Cable adapter guide.
| PDF - 10/09/09 |
MIPI-60 base adapter
Base adapter attached to XDS560v2 emulation cable.
| PDF - 10/09/09 |
MIPI-60 to CTI-20 adapter
Maps MIPI-60 to TI CTI-20 header.
| PDF - 10/09/09 |
MIPI-60 to TI-14 adapter
Maps MIPI-60 to TI-14 header.
| PDF - 10/09/09 |
MIPI-60 to TI-60 adapter
Maps MIPI-60 to TI-60 header.
| PDF - 10/09/09 |
MIPI-60 to ARM-20 adapter
Maps MIPI-60 to ARM-20 header.
| PDF - 10/09/09 |
CTI-20 to microSD-cJTAG
Maps CTI-20 to microSD connector configured for cJTAG.
| schem PDF
mech PDF
JPG - 03/24/2011 |
CTI-20 base adapter
CTI20 base adapter attached to XDS560v2 emulation cable.
The adapter is a reduced signal set of the standard XDS560v2 base
adapter with integrated CTI-20 target side connectors. This adapter
supports CTI-20 to xxxx adapters normally included in XDS510 and XDS560v1
products.
| PDF - 06/04/11 |
CTI-20/TI-14 Male to MIPI-60
Maps CTI-20 male to MIPI-60 connector. Used to map XDS1xx, XDS51x and XDS560v1 CTI-20 cables to a MIPI-60 target.
| schem PDF
|
CTI-20 to ARM-20 adapter
Maps CTI-20 to ARM-20.
| PDF - 09/06/2011 |
CTI-20 to TI-14 adapter
Maps CTI-20 to TI-14.
| PDF - 09/06/2011 |
TI-14 to ARM-20 Stellaris
Maps TI-14 to ARM-20 with optional RTCK loopback for Stellaris support.
| schem PDF
|
TI-14 to CTI-20
Maps TI-14 to CTI-20.
| schem PDF
|
TI-14 to CTI-20 Low Volatage Adaptive Clocking
Maps TI-14 to CTI-20 with low voltage and adaptive clocking support.
| schem PDF
|
TI-14 to TI-14 Low Volatage Adaptive Clocking
Maps TI-14 to TI-14 with low voltage and adaptive clocking support.
| schem PDF
|
